3 BKHL LK / 3 BKHS LK

3-way ball valve in block design



Properties

Connection 1 - 3 metric cylindrical outer thread
Construction Compact construction
Bore L shaped
Sealing form 1 - 3 24° inner cone
Surface burnished
Contact travel 0°; 90°
Material NBR O-ring, POM ball seal, Steel housing, ball and operating shaft

Hints

Please refer to the operating instructions for ball valves.
Note the permissible pressure limits for the connecting elements.

Article Table

Product Name DN* Series for external pipe Ø mm Connecting thread Overlap LW mm Operating pressure AF mm SF*
Product Name DN* Series for external pipe Ø mm Connecting thread Overlap LW mm Operating pressure AF mm SF*
3 BKHL 04 LK 4 L 6 M 12x1,5 negative (open) 5,0 PN 400 9 1,5
3 BKHL 06 LK 6 L 8 M 14x1,5 negative (open) 6,0 PN 400 9 1,5
3 BKHL 08 LK 8 L 10 M 16x1,5 negative (open) 7,0 PN 400 9 1,5
3 BKHL 10 LK 10 L 12 M 18x1,5 negative (open) 9,0 PN 400 9 1,5
3 BKHL 13 LK 12 L 15 M 22x1,5 negative (open) 11,5 PN 350 9 1,5
3 BKHL 16 LK 16 L 18 M 26x1,5 negative (open) 14,0 PN 350 12 1,5
3 BKHL 20 LK 19 L 22 M 30x2 negative (open) 18,0 PN 350 14 1,5
3 BKHL 25 LK 25 L 28 M 36x2 negative (open) 22,0 PN 350 14 1,5
3 BKHS 04 LK 4 S 8 M 16x1,5 negative (open) 5,0 PN 400 9 1,5
3 BKHS 06 LK 6 S 10 M 18x1,5 negative (open) 6,0 PN 400 9 1,5
3 BKHS 08 LK 8 S 12 M 20x1,5 negative (open) 7,0 PN 400 9 1,5
3 BKHS 10 LK 10 S 14 M 22x1,5 negative (open) 9,0 PN 400 9 1,5
3 BKHS 13 LK 12 S 16 M 24x1,5 negative (open) 11,5 PN 350 9 1,5
3 BKHS 16 LK 16 S 20 M 30x2 negative (open) 14,0 PN 350 12 1,5
3 BKHS 20 LK 19 S 25 M 36x2 negative (open) 18,0 PN 350 14 1,5
3 BKHS 25 LK 25 S 30 M 42x2 negative (open) 22,0 PN 350 14 1,5
DN = Nominal diameter, nominal width - Series: LL = Very light L = Light S = Heavy - LW = Clearance - PN = Nominal pressure PB = Max. operating pressure - AF = Width across flats - SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.