3 BKHL T / 3 BKHS T

3-way ball valve in block design



Properties

Connection 1 - 3 metric cylindrical outer thread
Bore T shaped
Sealing form 1 - 3 24° inner cone
Surface burnished
Contact travel 0°; 90°
Material NBR O-ring, POM ball seal, Steel housing, ball and operating shaft

Hints

Note the permissible pressure limits for the connecting elements.
Please refer to the operating instructions for ball valves.

Article Table

Product Name DN* Series for external pipe Ø mm Connecting thread Overlap LW mm Operating pressure AF mm SF*
Product Name DN* Series for external pipe Ø mm Connecting thread Overlap LW mm Operating pressure AF mm SF*
3 BKHL 04 T 4 L 6 M 12x1,5 positive (closed) 5,0 PN 500 12 1,5
3 BKHL 06 T 6 L 8 M 14x1,5 positive (closed) 6,0 PN 500 12 1,5
3 BKHL 08 T 8 L 10 M 16x1,5 positive (closed) 9,0 PN 500 14 1,5
3 BKHL 10 T 10 L 12 M 18x1,5 positive (closed) 9,0 PN 500 14 1,5
3 BKHL 13 T 12 L 15 M 22x1,5 positive (closed) 12,5 PN 400 14 1,5
3 BKHL 16 T 16 L 18 M 26x1,5 positive (closed) 12,5 PN 400 17 1,5
3 BKHL 20 T 19 L 22 M 30x2 positive (closed) 19,0 PN 400 17 1,5
3 BKHL 25 T 25 L 28 M 36x2 positive (closed) 24,0 PN 350 17 1,5
3 BKHL 32 T 31 L 35 M 45x2 positive (closed) 24,0 PN 350 17 1,5
3 BKHL 40 T 38 L 42 M 52x2 positive (closed) 36,0 PN 63 22 1,5
3 BKHS 04 T 4 S 8 M 16x1,5 positive (closed) 5,0 PN 500 12 1,5
3 BKHS 06 T 6 S 10 M 18x1,5 positive (closed) 6,0 PN 500 12 1,5
3 BKHS 08 T 8 S 12 M 20x1,5 positive (closed) 9,0 PN 500 14 1,5
3 BKHS 10 T 10 S 14 M 22x1,5 positive (closed) 9,0 PN 500 14 1,5
3 BKHS 13 T 12 S 16 M 24x1,5 positive (closed) 12,5 PN 400 14 1,5
3 BKHS 16 T 16 S 20 M 30x2 positive (closed) 12,5 PN 400 17 1,5
3 BKHS 20 T 19 S 25 M 36x2 positive (closed) 19,0 PN 400 17 1,5
3 BKHS 25 T 25 S 30 M 42x2 positive (closed) 24,0 PN 350 17 1,5
3 BKHS 32 T 31 S 38 M 52x2 positive (closed) 24,0 PN 350 17 1,5
DN = Nominal diameter, nominal width - Series: LL = Very light L = Light S = Heavy - LW = Clearance - PN = Nominal pressure PB = Max. operating pressure - AF = Width across flats - SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.