3 BKHL TK VZ / 3 BKHS TK VZ

3-way ball valve in block design



Properties

Connection 1 - 3 metric cylindrical outer thread
Construction Compact construction
Bore T shaped
Sealing form 1 - 3 24° inner cone
Surface electro galvanised
Contact travel 0°; 90°
Material NBR O-ring, POM ball seal, Steel housing, ball and operating shaft

Hints

Note the permissible pressure limits for the connecting elements.
Please refer to the operating instructions for ball valves.

Article Table

Product Name DN* Series for external pipe Ø mm Connecting thread Overlap LW mm Operating pressure AF mm SF*
Product Name DN* Series for external pipe Ø mm Connecting thread Overlap LW mm Operating pressure AF mm SF*
3 BKHL 04 TK VZ 4 L 6 M 14x1,5 negative (open) 5,0 PN 400 9 1,5
3 BKHL 06 TK VZ 6 L 8 M 14x1,5 negative (open) 6,0 PN 400 9 1,5
3 BKHL 08 TK VZ 8 L 10 M 16x1,5 negative (open) 7,0 PN 400 9 1,5
3 BKHL 10 TK VZ 10 L 12 M 18x1,5 negative (open) 9,0 PN 400 9 1,5
3 BKHL 13 TK VZ 12 L 15 M 22x1,5 negative (open) 11,5 PN 350 9 1,5
3 BKHL 16 TK VZ 16 L 18 M 26x1,5 negative (open) 14,0 PN 350 12 1,5
3 BKHS 04 TK VZ 4 S 8 M 16x1,5 negative (open) 5,0 PN 400 9 1,5
3 BKHS 06 TK VZ 6 S 10 M 18x1,5 negative (open) 6,0 PN 400 9 1,5
3 BKHS 08 TK VZ 8 S 12 M 20x1,5 negative (open) 7,0 PN 400 9 1,5
3 BKHS 10 TK VZ 10 S 14 M 22x1,5 negative (open) 9,0 PN 400 9 1,5
3 BKHS 13 TK VZ 12 S 16 M 24x1,5 negative (open) 11,5 PN 350 9 1,5
3 BKHS 16 TK VZ 16 S 20 M 30x2 negative (open) 14,0 PN 350 12 1,5
DN = Nominal diameter, nominal width - Series: LL = Very light L = Light S = Heavy - LW = Clearance - PN = Nominal pressure PB = Max. operating pressure - SF = Safety factor - AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.