3-way ball valve in block design

  • Image_1 Image_1
  • Image_2 Image_2


Bore T shaped
Connection 1 - 3 BSP cylindrical internal threads
Construction Compact construction
Contact travel 0°; 90°
Material Steel housing, ball and operating shaft, POM ball seal, NBR O-ring
Sealing form 1 - 3 for screw-in pins with shapes A, B and if necessary E
Surface electro galvanised
Temp. max. 80 °C
Temp. min. -10 °C


Bitte die Bedienungsanleitung für Kugelhähne beachten.
Bitte die zul.
Druckangaben der Verbindungselemente beachten.

Article Table

Product Name Überdeckung SF* DN* Betriebsdruck LW mm SW mm Anschlussgewinde
Product Name Überdeckung SF* DN* Betriebsdruck LW mm SW mm Anschlussgewinde
3BKR04TKVZ negative (open) 1.5 4 PN 400 5.0 mm 9 mm G 1/8" -28
3BKR06TKVZ negative (open) 1.5 6 PN 400 6.0 mm 9 mm G 1/4" -19
3BKR10TKVZ negative (open) 1.5 10 PN 400 9.0 mm 9 mm G 3/8" -19
3BKR13TKVZ negative (open) 1.5 12 PN 350 11.5 mm 9 mm G 1/2" -14
DN = Nominal diameter, nominal width, LW = Clearance, PN = Nominal pressure PB = Max. operating pressure, AF = Width across flats, SF = Safety factor


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.