3 SKR LK VZ

3-way ball valve, in forged design

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Bore L shaped
Connection 1 - 3 BSP cylindrical internal threads
Construction Compact construction
Contact travel 0°; 90°
Material POM ball seal
NBR O-ring
Forged steel housing
Steel ball and operating shaft
Sealing form 1 - 3 for screw-in pins with shapes A, B and if necessary E
Surface electro galvanised
Temp. max. 80 °C
Temp. min. -10 °C

Hints

Please refer to the operating instructions for ball valves.
Note the permissible pressure limits for the connecting elements.

Article Table

Product Name Overlap SF* DN* Operating pressure AF mm LW mm Connecting thread
Product Name Overlap SF* DN* Operating pressure AF mm LW mm Connecting thread
3 SKR 20 LK VZ negative (open) 1.5 19 PN 350 14 18 G 3/4" -14
3 SKR 25 LK VZ negative (open) 1.5 25 PN 350 14 22 G 1" -11
DN = Nominal diameter, nominal width
PN = Nominal pressure PB = Max. operating pressure
LW = Clearance
AF = Width across flats
SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.