3 SKR TK

3-way ball valve, in forged design

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Bore T shaped
Connection 1 - 3 BSP cylindrical internal threads
Contact travel 0°; 90°
Design 3-way ball valve, in forged design
Material POM ball seal
NBR O-ring
Forged steel housing
Steel ball and operating shaft
Sealing form 1 - 3 for screw-in pins with shapes A, B and if necessary E
Surface burnished
Temp. max. 80 °C
Temp. min. -10 °C

Hints

Please refer to the operating instructions for ball valves.
Note the permissible pressure limits for the connecting elements.

Article Table

Product Name SF* DN* Connecting thread Operating pressure Overlap AF mm LW mm
Product Name SF* DN* Connecting thread Operating pressure Overlap AF mm LW mm
3 SKR 20 TK 1.5 3-way ball valve, in forged design; burnished 19 G 3/4" -14 PN 350 negative (open) 14 20
3 SKR 25 TK 1.5 3-way ball valve, in forged design; burnished 25 G 1" -11 PN 350 negative (open) 14 24
DN = Nominal diameter, nominal width
LW = Clearance
PN = Nominal pressure
PB = Max. operating pressure
AF = Width across flats
SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.