3 SKR TK VZ

3-way ball valve, in forged design

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Bore T shaped
Connection 1 - 3 BSP cylindrical internal threads
Contact travel 0°; 90°
Design 3-way ball valve, in forged design
Material POM ball seal, NBR O-ring, Forged steel housing, Steel ball and operating shaft
Sealing form 1 - 3 for screw-in pins with shapes A, B and if necessary E
Surface electro galvanised
Temp. max. 80 °C
Temp. min. -10 °C

Hints

Bitte die Bedienungsanleitung für Kugelhähne beachten.
Bitte die zul.
Druckangaben der Verbindungselemente beachten.

Article Table

Product Name Überdeckung SF* DN* Betriebsdruck SW mm LW mm Anschlussgewinde
Product Name Überdeckung SF* DN* Betriebsdruck SW mm LW mm Anschlussgewinde
3SKR20TKVZ negative (open) 1.5 19 PN 350 14 mm 20 mm G 3/4" -14
3SKR25TKVZ negative (open) 1.5 25 PN 350 14 mm 24 mm G 1" -11
DN = Nominal diameter, nominal width, LW = Clearance, PN = Nominal pressure PB = Max. operating pressure, AF = Width across flats, SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.