AFC (3000 / 6000 PSI)

SAE sealing flange



Properties

Design SAE sealing flange
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Pressure series PB 10.9 bar Size C mm D mm E mm F mm H mm L mm M metr. M unc
Product Name Pressure series PB 10.9 bar Size C mm D mm E mm F mm H mm L mm M metr. M unc
AFC 80 3000 PSI 350 1/2" 38,1 56 17,5 48 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFC 100 3000 PSI 350 3/4" 47,6 65 22,2 50 16 11,0 M 10 x 35 3/8" x 1.1/2"
AFC 102 3000 PSI 315 1" 52,4 70 26,2 60 19 11,0 M 10 x 35 3/8" x 1.1/2"
AFC 104 3000 PSI 250 1.1/4" 58,7 79 30,2 68 18 11,5 M 10 x 40 7/16" x 1.1/2"
AFC 106 3000 PSI 200 1.1/2" 69,9 93 35,7 78 20 13,5 M 12 x 45 7/16" x 1.1/2"
AFC 108 3000 PSI 200 2" 77,8 102 42,9 90 20 13,5 M 12 x 45 7/16" x 1.1/2"
AFC 110 3000 PSI 160 2.1/2" 88,9 114 50,8 105 20 13,5 M 12 x 45 7/16" x 1.1/2"
AFC 112 3000 PSI 138 3" 106,4 134 61,9 124 24 17,5 M 16 x 50 5/8" x 2"
AFC 114 3000 PSI 35 3.1/2" 120,7 152 69,9 136 22 17,5 M 16 x 50 5/8" x 2"
AFC 116 3000 PSI 35 4" 130,2 162 77,8 146 25 17,5 M 16 x 50 5/8" x 2"
AFC 118 3000 PSI 35 5" 152,4 190 92,1 170 28 17,5 M 16 x 50 5/8" x 2"
AFC 401 6000 PSI 400 1/2" 40,5 56 18,2 48 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFC 402 6000 PSI 400 3/4" 50,8 71 23,8 60 19 11,0 M 10 x 35 3/8" x 1.1/2"
AFC 403 6000 PSI 400 1" 57,2 81 27,8 70 24 13,0 M 12 x 45 7/16" x 1.1/2"
AFC 404 6000 PSI 400 1.1/4" 66,7 95 31,8 78 27 *1 M 14 x 45 1/2" x 1.3/4"
AFC 405 6000 PSI 400 1.1/2" 79,4 112 36,5 94 30 17,0 M 16 x 50 5/8" x 2"
AFC 406 6000 PSI 400 2" 96,8 134 44,5 114 28 21,0 M 20 x 65 3/4" x 2.1/2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.