AFG JIC (6000 PSI)

SAE external thread flange



Properties

Design SAE external thread flange
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size A Ø B mm C mm D mm E mm F mm G mm H mm L mm M metr. M unc
Product Name PB 10.9 bar Size A Ø B mm C mm D mm E mm F mm G mm H mm L mm M metr. M unc
AFG 401 JIC 3/4 400 1/2" UNF 3/4" -16 9,9 40,5 56 18,2 48 60 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFG 401 JIC 7/8 400 1/2" UNF 7/8" -14 12,3 40,5 56 18,2 48 60 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFG 402 JIC 1 1/16 400 3/4" UNF 1 1/16" -12 15,5 50,8 71 23,8 60 73 19 11,5 M 10 x 35 3/8" x 1.1/2"
AFG 403 JIC 1 5/16 400 1" UN 1.5/16" -12 21,5 57,2 81 27,8 70 82 24 13,0 M 12 x 45 7/16" x 1.3/4"
AFG 404 JIC 1 5/16 400 1.1/4" UN 1.5/16" -12 21,5 66,7 95 31,8 78 92 27 *1 M 14 x 50 1/2" x 1.3/4"
AFG 404 JIC 1 5/8 400 1.1/4" UN 1.5/8" -12 27,5 66,7 95 31,8 78 92 27 *1 M 14 x 50 1/2" x 1.3/4"
AFG 405 JIC 1 7/8 400 1.1/2" UN 1.7/8" -12 33,0 79,4 113 36,5 95 96 30 17,5 M 16 x 50 5/8" x 2"
Series: LL = Very light L = Light S = Heavy - Ø = External pipe diameter - PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.