AFG M (3000 PSI)

SAE external thread flange



Properties

Design SAE external thread flange
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard DIN 3901/3902
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Series Ø RAD mm PB 10.9 bar Size A Ø B mm C mm E mm G1 mm I mm L mm M metr. M unc
Product Name Series Ø RAD mm PB 10.9 bar Size A Ø B mm C mm E mm G1 mm I mm L mm M metr. M unc
AFG 80 M/L15 L 15 315 1/2" M22x1,5 12 38,1 17,5 52 7,0 9,0 M 8 x 30 5/16" x 1.1/4"
AFG 100 M/L22 L 22 160 3/4" M30x2 19 47,6 22,2 60 7,5 11,5 M 10 x 30 3/8" x 1.1/4"
AFG 100 M/S20 S 20 345 3/4" M30x2 16 47,6 22,2 60 10,5 11,5 M 10 x 30 3/8" x 1.1/4"
AFG 102 M/L22 L 22 160 1" M30x2 19 52,4 26,2 63 7,5 11,5 M 10 x 30 3/8" x 1.1/4"
AFG 102 M/L28 L 28 160 1" M36x2 24 52,4 26,2 63 7,5 11,5 M 10 x 30 3/8" x 1.1/4"
AFG 102 M/S20 S 20 315 1" M30x2 16 52,4 26,2 63 10,5 11,5 M 10 x 30 3/8" x 1.1/4"
AFG 102 M/S25 S 25 315 1" M36x2 20 52,4 26,2 63 12,0 11,5 M 10 x 30 3/8" x 1.1/4"
AFG 104 M/L28 L 28 160 1.1/4" M36x2 24 58,7 30,2 65 7,5 11,5 M 10 x 35 7/16" x 1.1/2"
AFG 104 M/L35 L 35 160 1.1/4" M45x2 29 58,7 30,2 65 10,5 11,5 M 10 x 35 7/16" x 1.1/2"
AFG 104 M/S30 S 30 250 1.1/4" M42x2 25 58,7 30,2 65 13,5 11,5 M 10 x 35 7/16" x 1.1/2"
AFG 106 M/L42 L 42 160 1.1/2" M52x2 36 69,9 35,7 70 11,0 13,5 M 12 x 35 1/2" x 1.1/2"
AFG 106 M/S38 S 38 200 1.1/2" M52x2 32 69,9 35,7 70 16,0 13,5 M 12 x 35 1/2" x 1.1/2"
PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter - Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.