AFG M (6000 PSI)

SAE external thread flange



Properties

Design SAE external thread flange
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard DIN 3901/3902
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Series Ø RAD mm PB 10.9 bar Size A Ø B mm C mm E mm G1 mm I mm L mm M metr. M unc
Product Name Series Ø RAD mm PB 10.9 bar Size A Ø B mm C mm E mm G1 mm I mm L mm M metr. M unc
AFG 401 M/S16 S 16 400 1/2" M24x1,5 12 40,5 18,2 60 8,5 9,0 M 8 x 30 5/16" x 1.1/4"
AFG 402 M/S25 S 25 400 3/4" M36x2 19 50,8 23,8 73 12,0 11,5 M 10 x 35 3/8" x 1.1/2"
AFG 403 M/S30 S 30 400 1" M42x2 25 57,2 27,8 82 13,5 13,0 M 12 x 45 7/16" x 1.3/4"
AFG 404 M/S30 S 30 400 1.1/4" M42x2 25 66,7 31,8 92 13,5 *1 M 14 x 50 1/2" x 1.3/4"
AFG 404 M/S38 S 38 400 1.1/4" M52x2 29 66,7 31,8 92 16,0 *1 M 14 x 50 1/2" x 1.3/4"
AFG 405 M/S38 S 38 400 1.1/2" M52x2 32 79,4 36,5 96 16,0 17,5 M 16 x 50 5/8" x 2"
PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter - Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.