AFS N (3000 PSI)

SAE screw-in flange, NPT



Properties

Design SAE screw-in flange
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size A Ø B mm C mm D mm E mm F mm G mm H mm I mm L mm M metr. M unc
Product Name PB 10.9 bar Size A Ø B mm C mm D mm E mm F mm G mm H mm I mm L mm M metr. M unc
AFS 80 N 1/2 350 1/2" NPT 1/2" 13 38,1 54 17,5 46 36 16 19 9,0 M 8 x 30 5/16" x 1.1/4"
AFS 80 N 3/8 350 1/2" NPT 3/8" -18 13 38,1 54 17,5 46 36 16 19 9,0 M 8 x 30 5/16" x 1.1/4"
AFS 100 N 1/2 350 3/4" NPT 1/2" 13 47,6 65 22,2 50 36 18 19 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 100 N 3/4 350 3/4" NPT 3/4" -14 19 47,6 65 22,2 50 36 18 19 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 102 N 3/4 315 1" NPT 3/4" -14 19 52,4 70 26,2 55 35 21 19 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 102 N 1 315 1" NPT 1" 25 52,4 70 26,2 55 38 18 22 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 104 N 1 250 1.1/4" NPT 1" 25 58,7 81 30,2 65 42 25 22 11,5 M 10 x 40 7/16" x 1.1/2"
AFS 104 N1 1/4 250 1.1/4" NPT 1.1/4" 32 58,7 79 30,2 68 41 21 22 11,5 M 10 x 40 7/16" x 1.1/2"
AFS 106 N1 1/4 200 1.1/2" NPT 1.1/4" 32 69,9 95 35,7 78 45 27 24 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 106 N1 1/2 200 1.1/2" NPT 1.1/2" 38 69,9 93 35,7 78 45 25 24 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 108 N1 1/2 200 2" NPT 1.1/2" 38 77,8 102 42,9 90 45 25 26 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 108 N 2 200 2" NPT 2" -11.5 51 77,8 102 42,9 90 45 25 30 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 110 N2 1/2 160 2.1/2" NPT 2.1/2" -11.5 63 88,9 114 50,8 105 50 25 30 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 112 N 138 3" NPT 3" -11.5 73 106,4 134 61,9 124 50 27 34 17,5 M 16 x 50 5/8" x 2"
AFS 114 N 35 3.1/2" NPT 3.1/2" -11.5 89 120,7 152 69,9 136 48 27 34 17,5 M 16 x 50 5/8" x 2"
AFS 116 N 35 4" NPT 4" -11.5 99 130,2 162 77,8 146 48 27 34 17,5 M 16 x 50 5/8" x 2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.