AFS ST (3000 PSI)

SAE welded on flange - imperial


Properties

Design SAE welded on flange - imperial
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size A mm Ø B mm C mm D mm E mm F mm G mm H mm L mm M metr. M unc
Product Name PB 10.9 bar Size A mm Ø B mm C mm D mm E mm F mm G mm H mm L mm M metr. M unc
AFS 80 ST 350 1/2" 21,6 13 38,1 54 17,5 46 36 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFS 80 ST 038 350 1/2" 17,5 13 38,1 54 17,5 46 36 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFS 100 ST 350 3/4" 28,0 19 47,6 65 22,2 50 36 18 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 102 ST 315 1" 34,0 25 52,4 70 26,2 55 38 18 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 104 ST 250 1.1/4" 42,8 32 58,7 79 30,2 68 41 21 11,5 M 10 x 40 7/16" x 1.1/2"
AFS 106 ST 200 1.1/2" 48,6 38 69,9 93 35,7 78 44 25 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 108 ST 200 2" 61,0 51 77,8 102 42,9 90 45 25 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 110 ST 160 2.1/2" 77,0 63 88,9 114 50,8 105 50 25 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 112 ST 138 3" 92,0 73 106,4 134 61,9 124 50 27 17,5 M 16 x 50 5/8" x 2"
AFS 114 ST 35 3.1/2" 103,0 89 120,7 152 69,9 136 48 27 17,5 M 16 x 50 5/8" x 2"
AFS 116 ST 35 4" 115,1 99 130,2 162 77,8 146 48 27 17,5 M 16 x 50 5/8" x 2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.