AFS ST (6000 PSI)

SAE-Anschweißflansch, zöllig



Properties

Design SAE welded on flange - imperial
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size A mm Ø B mm C mm D mm E mm F mm G mm H mm L mm M metr. M unc
Product Name PB 10.9 bar Size A mm Ø B mm C mm D mm E mm F mm G mm H mm L mm M metr. M unc
AFS 401 ST 012 400 1/2" 21,5 13 40,5 54 18,2 46 36 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFS 401 ST 038 400 1/2" 17,5 13 40,5 54 18,2 46 36 16 9,0 M 8 x 30 5/16" x 1.1/4"
AFS 402 ST 400 3/4" 28,0 19 50,8 71 23,8 55 35 21 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 403 ST 400 1" 34,0 25 57,2 79 27,8 68 41 21 13,0 M 12 x 45 7/16" x 1.3/4"
AFS 404 ST 375 1.1/4" 42,8 32 66,7 93 31,8 78 44 25 15,0 M 14 x 45 1/2" x 1.3/4"
AFS 405 ST 250 1.1/2" 48,6 38 79,4 112 36,5 94 55 30 17,0 M 16 x 50 5/8" x 2"
AFS 406 ST 250 2" 61,0 51 96,8 134 44,5 114 65 37 21,0 M 20 x 65 3/4" x 2.1/2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.