AFS STRE (3000 PSI)

SAE stub end



Properties

Construction type ND 40
Design SAE stub end
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size Pipe A mm B1 mm B2 mm G mm C mm E mm H mm L mm M metr. M unc
Product Name PB 10.9 bar Size Pipe A mm B1 mm B2 mm G mm C mm E mm H mm L mm M metr. M unc
AFS 80 STRE 21.3 350 1/2" 21.3 x 2.6 22 16,0 13 35,0 38,1 17,5 16,0 9,0 M 8 x 30 5/16" x 1.1/4"
AFS 100 STRE 26.9 350 3/4" 26.9 x 2.6 28 21,5 19 36,0 47,6 22,3 18,0 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 102 STRE 33.7 315 1" 33.7 x 3.2 35 27,0 25 38,0 52,4 26,2 18,0 11,0 M 10 x 35 3/8" x 1.1/2"
AFS 104 STRE 42.2 250 1.1/4" 42.4 x 3.2 43 36,0 31 41,0 58,7 30,2 21,0 11,5 M 10 x 40 7/16" x 1.1/2"
AFS 106 STRE 48.3 200 1.1/2" 48.3 x 3.2 49 42,0 38 44,0 69,9 35,7 25,0 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 108 STRE 48.3 200 2" 48.3 x 3.2 49 42,0 42 45,0 77,8 42,9 25,0 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 108 STRE 60.3 200 2" 60.3 x 3.6 61 53,0 49 45,0 77,8 42,9 25,0 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 110 STRE 60.3 160 2.1/2" 60.3 x 3.6 61 53,0 53 50,0 88,9 50,8 25,0 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 110 STRE 76.1 160 2.1/2" 76.1 x 3.6 77 70,0 62 50,0 88,9 50,8 25,0 13,5 M 12 x 45 1/2" x 1.3/4"
AFS 112 STRE 88.9 138 3" 88.9 x 3.6 90 82,0 74 51,0 106,4 61,9 26,0 17,5 M 16 x 50 5/8" x 2"
AFS 114 STRE 76.1 35 3.1/2" 76.1 x 3.6 77 70,0 70 48,0 120,7 69,9 26,0 17,5 M 16 x 50 5/8" x 2"
AFS 114 STRE 88.9 35 3.1/2" 88.9 x 3.6 90 82,0 82 48,0 120,7 69,9 26,0 17,5 M 16 x 50 5/8" x 2"
AFS 116 STRE 114.3 35 4" 114 x 3.6 115 107,0 102 48,0 130,2 77,8 26,0 17,5 M 16 x 50 5/8" x 2"
AFS 116 STRE 88.9 35 4" 88.9 x 3.6 90 82,0 82 48,0 130,2 77,8 26,0 17,5 M 16 x 50 5/8" x 2"
AFS 118 STRE 139.7 * 35 5" 139.7 x 4 131 120,0 131 28,0 152,4 92,1 28,0 17,5 M 16 x 55 5/8" x 2"
PN = Nominal pressure PB = Max. operating pressure - *) AFS 118 STRE 139.7: Design as socket weld flat flange.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.