AFS T (3000 / 6000 PSI)

SAE screw-in flange, UN/UNF



Properties

Design SAE screw-in flange
Construction straight
Mounting Screw bore hole
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name Pressure series PB 10.9 bar Size A Ø B mm C mm D mm E mm F mm G mm H mm I mm L mm
Product Name Pressure series PB 10.9 bar Size A Ø B mm C mm D mm E mm F mm G mm H mm I mm L mm
AFS 80 T 3000 PSI 350 1/2" UNF 3/4" -16 13 38,1 54 17,5 46 36 16 17 9,0
AFS 100 T 3000 PSI 350 3/4" UNF 1 1/16" -12 19 47,6 65 22,3 50 36 18 23 11,0
AFS 102 T 3000 PSI 315 1" UN 1.5/16" -12 25 52,4 70 26,2 55 38 18 23 11,0
AFS 104 T 3000 PSI 250 1.1/4" UN 1.5/8" -12 32 58,7 79 30,2 68 41 21 23 11,5
AFS 106 T 3000 PSI 200 1.1/2" UN 1.7/8" -12 38 69,9 93 35,7 78 45 25 23 13,5
AFS 401 T 6000 PSI 400 1/2" UNF 3/4" -16 13 40,5 54 18,2 46 36 16 17 9,0
AFS 402 T 6000 PSI 400 3/4" UNF 1 1/16" -12 19 50,8 71 23,8 55 35 21 23 11,0
AFS 403 T 6000 PSI 400 1" UN 1.5/16" -12 25 57,2 81 27,8 65 42 25 23 13,0
AFS 404 T 6000 PSI 400 1.1/4" UN 1.5/8" -12 32 66,7 95 31,8 78 45 27 23 *1
AFS 405 T 6000 PSI 400 1.1/2" UN 1.7/8" -12 38 79,4 112 36,5 94 50 30 23 17,0
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.