AOVR O

Screw-in fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric nut thread
Construction straight
Design Screw-in fitting
Material Steel
Sealing form 1 form G
Sealing form 2 24° outer cone with O-ring
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm OR2 G2 L2 mm Operating pressure S1 Ø d mm OR1 AF mm G1 Series
Product Name i mm OR2 G2 L2 mm Operating pressure S1 Ø d mm OR1 AF mm G1 Series
AOVR O NW 03 S 12 4.0 x 1.5 M 14 x 1.5 26.0 PN 630 17 6 9.30 x 2.30 19 G 1/4" -19 S
AOVR O NW 04 S 12 6.0 x 1.5 M 16 x 1.5 28.0 PN 630 19 8 11.30 x 2.30 19 G 1/4" -19 S
AOVR O NW 06 S 12 7.5 x 1.5 M 18 x 1.5 30.5 PN 630 22 10 13.30 x 2.30 22 G 3/8" -19 S
AOVR O NW 08 S 12 9.0 x 1.5 M 20 x 1.5 32.5 PN 630 24 12 15.30 x 2.30 22 G 3/8" -19 S
AOVR O NW 10 S 14 10.0 x 2.0 M 22 x 1.5 36.0 PN 630 27 14 17.86 x 2.62 27 G 1/2" -14 S
AOVR O NW 13 S 14 12.0 x 2.0 M 24 x 1.5 36.5 PN 400 30 16 12.00 x 2.00 27 G 1/2" -14 S
AOVR O NW 16 S 16 16.3 x 2.4 M 30 x 2 40.5 PN 400 36 20 23.50 x 3.00 32 G 3/4" -14 S
AOVR O NW 20 S 18 20.3 x 2.4 M 36 x 2 46.0 PN 400 46 25 29.50 x 3.00 41 G 1" -11 S
AOVR O NW 25 S 20 25.3 x 2.4 M 42 x 2 48.0 PN 250 50 30 38.00 x 3.00 50 G 1.1/4" -11 S
AOVR O NW 32 S 22 33.3 x 2.4 M 52 x 2 55.0 PN 250 55 38 44.04 x 3.53 55 G 1.1/2" -11 S
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.