ASK

Hose clamp

  • Image_1 Image_1

Properties

Construction type Hexagon screw with slot
Design Worm drive hose clamps
Material Steel
Standard DIN 3017
Surface galvanised

Article Table

Product Name Band width mm Clamping range (mm)
Product Name Band width mm Clamping range (mm)
ASK 08-12 9.0 8 - 12
ASK 10-16 9.0 10 - 16
ASK 12-20 9.0 12 - 20
ASK 16-25 12.0 16 - 25
ASK 20-32 12.0 20 - 32
ASK 25-40 12.0 25 - 40
ASK 35-50 12.0 35 - 50
ASK 40-60 12.0 40 - 60
ASK 50-70 12.0 50 - 70
ASK 60-80 12.0 60 - 80
ASK 70-90 12.0 70 - 90
ASK 80-100 12.0 80 - 100
ASK 90-110 12.0 90 - 110
ASK 100-120 12.0 100 - 120
ASK 110-130 12.0 110 - 130
ASK 120-140 12.0 120 - 140
ASK 130-150 12.0 130 - 150
ASK 140-160 12.0 140 - 160
ASK 150-170 12.0 150 - 170
ASK 160-180 12.0 160 - 180
ASK 170-190 12.0 170 - 190
ASK 180-200 12.0 180 - 200
ASK 190-210 12.0 190 - 210
ASK 200-220 12.0 200 - 220
ASK 210-230 12.0 210 - 230
ASK 220-240 12.0 220 - 240
ASK 230-250 12.0 230 - 250
ASK 240-260 12.0 240 - 260
ASK 250-270 12.0 250 - 270
ASK 260-280 12.0 260 - 280
ASK 270-290 12.0 270 - 290
ASK 280-300 12.0 280 - 300
ASK 290-310 12.0 290 - 310

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.