ASK A

Hose clamp

  • Image_1 Image_1

Properties

Construction type Hexagon screw with slot
Design Worm drive hose clamps
Material Steel
Standard DIN 3017
Surface galvanised

Article Table

Product Name Bandbreite mm Spannbereich (mm)
Product Name Bandbreite mm Spannbereich (mm)
ASK08-12A 9.0 mm 8 - 12
ASK08-14A 9.0 mm 8 - 14
ASK10-16A 9.0 mm 10 - 16
ASK11-17A 9.0 mm 11 - 17
ASK12-20A 9.0 mm 12 - 20
ASK13-20A 9.0 mm 13 - 20
ASK15-24A 12.0 mm 15 - 24
ASK16-25A 12.0 mm 16 - 25
ASK19-28A 12.0 mm 19 - 28
ASK20-32A 12.0 mm 20 - 32
ASK22-32A 12.0 mm 22 - 32
ASK25-40A 12.0 mm 25 - 40
ASK32-44A 12.0 mm 32 - 44
ASK32-50A 12.0 mm 32 - 50
ASK38-50A 12.0 mm 38 - 50
ASK40-60A 12.0 mm 40 - 60
ASK44-56A 12.0 mm 44 - 56
ASK50-70A 12.0 mm 50 - 70
ASK58-75A 12.0 mm 58 - 75
ASK60-80A 12.0 mm 60 - 80
ASK68-85A 12.0 mm 68 - 85
ASK70-90A 12.0 mm 70 - 90
ASK77-95A 12.0 mm 77 - 95
ASK80-100A 12.0 mm 80 - 100
ASK87-112A 12.0 mm 87 - 112
ASK90-110A 12.0 mm 90 - 110
ASK100-120A 12.0 mm 100 - 120
ASK104-138A 12.0 mm 104 - 138
ASK110-130A 12.0 mm 110 - 130
ASK120-140A 12.0 mm 120 - 140
ASK130-150A 12.0 mm 130 - 150
ASK130-165A 12.0 mm 130 - 65
ASK140-160A 12.0 mm 140 - 160
ASK150-170A 12.0 mm 150 - 170
ASK150-180A 12.0 mm 150 - 180
ASK160-180A 12.0 mm 160 - 180
ASK170-190A 12.0 mm 170 - 190
ASK175-205A 12.0 mm 175 - 205
ASK180-200A 12.0 mm 180 - 200
ASK190-210A 12.0 mm 190 - 210
ASK200-220A 12.0 mm 200 - 220
ASK200-231A 12.0 mm 200 - 231
ASK210-230A 12.0 mm 210 - 230
ASK220-240A 12.0 mm 220 - 240
ASK226-256A 12.0 mm 226 - 256
ASK230-250A 12.0 mm 230 - 250
ASK240-260A 12.0 mm 240 - 260
ASK250-270A 12.0 mm 250 - 270
ASK251-282A 12.0 mm 251 - 282
ASK260-280A 12.0 mm 260 - 280
ASK270-290A 12.0 mm 270 - 290
ASK277-307A 12.0 mm 277 - 307
ASK280-300A 12.0 mm 280 - 300
ASK290-310A 12.0 mm 290 - 310

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.