AVM ED

Screw-in fitting



Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric nut thread
Design Screw-in fitting
Construction straight
Sealing form 1 Shape E
Sealing form 2 Pipe socket with cutting ring
Scope of supply Pipe socket with union nut and pre-assembled cutting ring
Standard DIN 2353, ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 G2 Ø d3 mm i mm L2 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G1 G2 Ø d3 mm i mm L2 mm AF mm S1
AVM NW 04 L ED L PN 315 6 M 10 x 1 M 12 x 1.5 13,9 8 24,5 14 14
AVM NW 06 L ED L PN 315 8 M 12 x 1.5 M 14 x 1.5 16,9 12 26,5 17 17
AVM NW 08 L ED L PN 315 10 M 14 x 1.5 M 16 x 1.5 18,9 12 27,5 19 19
AVM NW 10 L ED L PN 315 12 M 16 x 1.5 M 18 x 1.5 21,9 12 30,5 22 22
AVM NW 13 L ED L PN 315 15 M 18 x 1.5 M 22 x 1.5 23,9 12 31,5 24 27
AVM NW 16 L ED L PN 315 18 M 22 x 1.5 M 26 x 1.5 26,9 14 31,5 27 32
AVM NW 20 L ED L PN 160 22 M 26 x 1.5 M 30 x 2 31,9 16 32,5 32 36
AVM NW 25 L ED L PN 160 28 M 33 x 2 M 36 x 2 39,9 18 35,0 41 41
AVM NW 32 L ED L PN 160 35 M 42 x 2 M 45 x 2 49,9 20 42,5 50 50
AVM NW 40 L ED L PN 160 42 M 48 x 2 M 52 x 2 54,9 22 46,5 55 60
AVM NW 03 S ED S PN 630 6 M 12 x 1.5 M 14 x 1.5 16,9 12 27,0 17 17
AVM NW 04 S ED S PN 630 8 M 14 x 1.5 M 16 x 1.5 18,9 12 29,5 19 19
AVM NW 06 S ED S PN 630 10 M 16 x 1.5 M 18 x 1.5 21,9 12 32,0 22 22
AVM NW 08 S ED S PN 630 12 M 18 x 1.5 M 20 x 1.5 23,9 12 34,0 24 24
AVM NW 10 S ED S PN 630 14 M 20 x 1.5 M 22 x 1.5 25,9 14 36,5 27 27
AVM NW 13 S ED S PN 400 16 M 22 x 1.5 M 24 x 1.5 26,9 14 37,0 27 30
AVM NW 16 S ED S PN 400 20 M 27 x 2 M 30 x 2 31,9 16 43,0 32 36
AVM NW 20 S ED S PN 400 25 M 33 x 2 M 36 x 2 39,9 18 48,0 41 46
AVM NW 25 S ED S PN 400 30 M 42 x 2 M 42 x 2 49,9 20 51,0 50 50
AVM NW 32 S ED S PN 315 38 M 48 x 2 M 52 x 2 54,9 22 60,0 55 60
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.