AVR ED MG

Screw-in fitting



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric nut thread
Design Screw-in fitting
Construction straight
Sealing form 1 Shape E
Sealing form 2 Pipe socket with cutting ring
Scope of supply Pipe socket with union nut and pre-assembled cutting ring
Standard DIN 2353, ISO 8434-1
Material Brass

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 G2 Ø d3 mm i mm L2 mm AF mm S1
Product Name Series Operating pressure Ø d2 mm G1 G2 Ø d3 mm i mm L2 mm AF mm S1
AVR NW 04 L ED MG L PN 200 6 G 1/8" -28 M 12 x 1.5 14,0 8 24,5 14 14
AVR NW 06 L ED MG L PN 200 8 G 1/4" -19 M 14 x 1.5 18,7 12 29,5 19 17
AVR NW 08 L ED MG L PN 200 10 G 1/4" -19 M 16 x 1.5 18,7 12 27,5 19 19
AVR NW 10 L ED MG L PN 200 12 G 3/8" -19 M 18 x 1.5 22,0 12 34,0 22 22
AVR NW 13 L ED MG L PN 200 15 G 1/2" -14 M 22 x 1.5 26,7 14 32,0 27 27
AVR NW 20 L ED MG L PN 100 22 G 3/4" -14 M 30 x 2 32,0 16 32,5 32 36
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.