BFK (6000 PSI)

SAE flare flange connector



Properties

Design SAE flare flange connector
Construction straight
Mounting with metric screw set
Scope of supply with screw set, flare coupling and O-ring
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material Flange: Steel C 45, flared part: 42CrMo4V

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB 10.9 bar Size Pipe A x X mm C mm D mm E mm F mm G mm I mm L mm Screws
Product Name PB 10.9 bar Size Pipe A x X mm C mm D mm E mm F mm G mm I mm L mm Screws
BFK 402-25-3 400 3/4" 25 x 3 50,8 71 23,8 60 75 16,5 11 (4 x) M 10 x 60
BFK 402-25-4 400 3/4" 25 x 4 50,8 71 23,8 60 75 16,5 11 (4 x) M 10 x 60
BFK 403-30-4 400 1" 30 x 4 57,2 81 27,8 71 85 17,4 13 (4 x) M 12 x 70
BFK 403-30-5 400 1" 30 x 5 57,2 81 27,8 71 85 17,4 13 (4 x) M 12 x 70
BFK 404-38-5 400 1.1/4" 38 x 5 66,7 95 31,8 81 88 18,4 15 (4 x) M 14 x 80
BFK 404-38-6 400 1.1/4" 38 x 6 66,7 95 31,8 81 88 18,4 15 (4 x) M 14 x 80
BFK 405-50-6 400 1.1/2" 50 x 6 79,4 114 36,5 96 114 20,6 17 (4 x) M 16 x 90
BFK 405-50-8 400 1.1/2" 50 x 8 79,4 114 36,5 96 114 20,6 17 (4 x) M 16 x 90
BFK 406-65-8 400 2" 65 x 8 96,8 134 44,5 114 130 22,4 21 (4 x) M 20 x 120
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.