BKHL VA / BKHS VA

2-way ball valve in block design


Properties

Connection 1 + 2 metric cylindrical outer thread
Sealing form 1 + 2 24° inner cone
Contact travel 0°; 90°
Material Stainless steel housing, ball and operating shaft

Hints

Note the permissible pressure limits for the connecting elements.
Please refer to the operating instructions for ball valves.

Article Table

Product Name DN* Series for external pipe Ø mm Connecting thread LW mm Operating pressure AF mm SF*
Product Name DN* Series for external pipe Ø mm Connecting thread LW mm Operating pressure AF mm SF*
BKHL 04 VA 4 L 6 M 12x1,5 5 PN 400 9 1,5
BKHL 06 VA 6 L 8 M 14x1,5 6 PN 400 9 1,5
BKHL 08 VA 8 L 10 M 16x1,5 8 PN 400 9 1,5
BKHL 10 VA 10 L 12 M 18x1,5 10 PN 400 9 1,5
BKHL 13 VA 12 L 15 M 22x1,5 13 PN 400 9 1,5
BKHL 16 VA 16 L 18 M 26x1,5 13 PN 400 12 1,5
BKHL 20 VA 19 L 22 M 30x2 20 PN 400 14 1,5
BKHL 25 VA 25 L 28 M 36x2 24 PN 400 14 1,5
BKHL 32 VA 31 L 35 M 45x2 24 PN 400 17 1,5
BKHL 40 VA 38 L 42 M 52x2 24 PN 400 17 1,5
BKHS 04 VA 4 S 8 M 16x1,5 5 PN 400 9 1,5
BKHS 06 VA 6 S 10 M 18x1,5 6 PN 400 9 1,5
BKHS 08 VA 8 S 12 M 20x1,5 8 PN 400 9 1,5
BKHS 10 VA 10 S 14 M 22x1,5 10 PN 400 9 1,5
BKHS 13 VA 12 S 16 M 24x1,5 13 PN 400 9 1,5
BKHS 16 VA 16 S 20 M 30x2 13 PN 400 12 1,5
BKHS 20 VA 19 S 25 M 36x2 20 PN 400 17 1,5
BKHS 25 VA 25 S 30 M 42x2 24 PN 400 17 1,5
BKHS 32 VA 31 S 38 M 52x2 24 PN 400 17 1,5
DN = Nominal diameter, nominal width - Series: LL = Very light L = Light S = Heavy - LW = Clearance - PN = Nominal pressure PB = Max. operating pressure - AF = Width across flats - SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.