BKR VZ

2-way ball valve in block design

  • Image_1 Image_1
  • Image_2 Image_2
  • Image_3 Image_3

Properties

Connection 1 + 2 BSP cylindrical internal threads
Contact travel 0°; 90°
Material Steel housing, ball and operating shaft, NBR O-ring, Polyamide ball seal
Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E
Surface electro galvanised
Temp. max. 80 °C
Temp. min. -10 °C

Hints

Bitte die Bedienungsanleitung für Kugelhähne beachten.
Bitte die zul.
Druckangaben der Verbindungselemente beachten.

Article Table

Product Name H mm DN* Betriebsdruck B mm H2 mm L mm Anschlussgewinde SF* H1 mm L1 mm A mm SW mm LW mm
Product Name H mm DN* Betriebsdruck B mm H2 mm L mm Anschlussgewinde SF* H1 mm L1 mm A mm SW mm LW mm
BKR04VZ 43.4 mm 4 PN 500 26 mm 12.8 mm 69 mm G 1/8" -28 1.5 32 mm 36.2 mm 107 mm 9 mm 5 mm
BKR06VZ 43.4 mm 6 PN 500 26 mm 12.8 mm 69 mm G 1/4" -19 1.5 32 mm 36.2 mm 107 mm 9 mm 6 mm
BKR10VZ 49.2 mm 10 PN 500 32 mm 16.25 mm 73 mm G 3/8" -19 1.5 38 mm 43.2 mm 107 mm 9 mm 10 mm
BKR13VZ 51.2 mm 12 PN 500 35 mm 17.25 mm 85 mm G 1/2" -14 1.5 40 mm 48.2 mm 107 mm 9 mm 13 mm
BKR20VZ 73.4 mm 19 PN 400 49 mm 24.5 mm 96 mm G 3/4" -14 1.5 57 mm 62.2 mm 165 mm 14 mm 20 mm
BKR25VZ 76.6 mm 25 PN 350 54 mm 26.5 mm 113 mm G 1" -11 1.5 60 mm 66.2 mm 165 mm 14 mm 24 mm
BKR32VZ 76.6 mm 31 PN 350 54 mm 26.5 mm 121 mm G 1.1/4" -11 1.5 60 mm 66.2 mm 165 mm 14 mm 24 mm
BKR40VZ 76.6 mm 38 PN 350 54 mm 26.5 mm 124 mm G 1.1/2" -11 1.5 60 mm 66.2 mm 165 mm 14 mm 24 mm
DN = Nominal diameter, nominal width, LW = Clearance, PN = Nominal pressure PB = Max. operating pressure, AF = Width across flats, SF = Safety factor

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.