BL (6000 PSI)

SAE blind plate



Properties

Design SAE blind plate
Construction straight
Scope of supply blind plate only
Standard ISO 6162, SAE J 518 C
Surface electro galvanised
Material S355J2G3 (C22)

Article Table

Product Name PB 10.9 bar Size A1 mm G mm C mm D mm E mm F mm H mm L mm M metr. M unc
Product Name PB 10.9 bar Size A1 mm G mm C mm D mm E mm F mm H mm L mm M metr. M unc
BL 6001 250 1/2" 31,8 14 40,5 56 18,2 48 7,8 8,7 M 8 x 30 5/16" x 1.1/4"
BL 6002 250 3/4" 41,3 15 50,8 71 23,8 60 8,8 10,5 M 10 x 35 3/8" x 1.1/2"
BL 6003 250 1" 47,6 16 57,2 81 27,8 70 9,5 *1 M 12 x 45 7/16" x 1.3/4"
BL 6004 250 1.1/4" 54,0 16 66,6 95 31,8 78 10,4 *2 M 14 x 45 1/2" x 1.3/4"
BL 6005 250 1.1/2" 63,5 19 79,3 113 36,5 95 12,6 17,0 M 16 x 55 5/8" x 2"
BL 6006 250 2" 79,4 30 96,8 133 44,5 114 12,6 21,0 M 20 x 70 3/4" x 2.1/2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.