BOE

Oil drain screw with valve

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Design Drain valve
Lieferumfang with copper ring and cap
Sealing form 1 Shape A
Temp. max. 200 °C
Temp. min. -30 °C

Description

The BOE oil drain screw is closed at rest (O-ring seal). When the oil drain hose is unscrewed
the valve is opened
allowing the oil to drain.

Hints

Werkstoff der Dichtscheibe in der Schutz-Kappe: NBR.
Werkstoff der Dichtung am Ventilsitz: FPM (Viton).

Article Table

Product Name G2 G1 Werkstoff
Product Name G2 G1 Werkstoff
BOE12-1.5 M 22 x 1.5 M 12 x 1,5 Steel
BOE14-1.5 M 22 x 1.5 M 14 x 1.5 Steel
BOE16-1.5 M 22 x 1.5 M 16 x 1.5 Steel
BOE18-1.5 M 26 x 1.5 M 18 x 1.5 Steel
BOE20-1.5 M 26 x 1.5 M 20 x 1.5 Steel
BOE20-1.75 M 26 x 1.5 M 20 x 1.75 Steel
BOE22-1.5 M 26 x 1.5 M 22 x 1.5 Steel
BOE22-1.75 M 26 x 1.5 M 22 x 1.75 Steel
BOE24-1.5 M 26 x 1.5 M 24 x 1.5 Brass
BOE24-2 M 26 x 1.5 M 24 x 2 Brass
BOE26-1.5 M 26 x 1.5 M 26 x 1.5 Brass
BOE30-1.5 M 26 x 1.5 M 30 x 1.5 Brass
BOE30-2 M 26 x 1.5 M 30 x 2 Brass
BOE32-1.5 M 26 x 1.5 M 32 x 1.5 Brass
BOE36-1.5 M 26 x 1.5 M 36 x 1.5 Brass
BOE36-2 M 26 x 1.5 M 36 x 2 Brass
BOE38-1.5 M 26 x 1.5 M 38 x 1.5 Brass

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.