BRAU SD

Food hose


Properties

Outer layer synthetic rubber with high ozone, abrasion, and weather resistance
Special features Phthalate-free tested in accordance with 1907/2006 / EC (REACH), Suction and pressure hose suitable for beer and a wide range of non-fatty foodstuffs, Vacuum-resistant 675 mmHg (26.6 inHg)
Insert highly tear-resistant synthetic textile insert and steel wire spiral
Application Food industry
Colour red
Inner layer odourless, toxin-free special EPDM rubber, generally suitable for use with foodstuffs, white
Approval 3A Sanitary Standard Class II. RAL REGISTRATION G-74, BFR RECOMMENDATION XXI CAT 2, DM 21.03.73 E SEGUENTI, EUROPEAN REGULATION 1935/2004/EC, Fulfils FDA 21 CFR 177.2600, JAPAN-MINISTRY OF HEALTH AND WELFARE NOTICE NO.370,1959 AND NO.201,2006

Article Table

Product Name Inches Internal Ø mm External Ø mm Wall thickness mm Operating pressure bar Burst pressure bar Min. bending radius mm
Product Name Inches Internal Ø mm External Ø mm Wall thickness mm Operating pressure bar Burst pressure bar Min. bending radius mm
BRAU SD 13-6 1/2" 13 24 5,5 16,0 48 45
BRAU SD 16-6 5/8" 16 27 5,5 16,0 48 55
BRAU SD 19-6 3/4" 19 31 6,0 16,0 48 65
BRAU SD 25-6 1" 25 37 6,0 16,0 48 90
BRAU SD 32-6 1.1/4" 32 44 6,0 16,0 48 120
BRAU SD 38-6.5 1.1/2" 38 53 6,5 16,0 48 155
BRAU SD 50-8 2" 50 66 8,0 16,0 48 215
BRAU SD 63-8 2.1/2" 63 81 8,0 16,0 48 275
BRAU SD 75-9 3" 75 94 9,5 16,0 48 330
BRAU SD 100-10 4" 100 120 10,0 16,0 48 450
BD = Working pressure - DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.