BZL / BZS MG

Lock without union nut



Properties

Design Lock without union nut
Construction straight
Sealing form 1 24° outer cone with O-ring
Standard DIN 2353, ISO 8434-1
Material Brass

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d1 mm Ø d2 mm L1 mm OR
Product Name Series Operating pressure Ø d1 mm Ø d2 mm L1 mm OR
BZL NW 04 MG L PN 200 6,6 6 18,5 4.0 x 1.5
BZL NW 06 MG L PN 200 8,5 8 18,0 6.0 x 1.5
BZL NW 08 MG L PN 200 10,6 10 19,5 7.5 x 1.5
BZL NW 10 MG L PN 200 12,6 12 19,0 9.0 x 1.5
BZL NW 13 MG L PN 200 15,5 15 19,0 12.0 x 2.0
BZL NW 16 MG L PN 200 18,6 18 22,0 15.0 x 2.0
BZL NW 20 MG L PN 100 22,6 22 22,0 20.0 x 2.0
BZL NW 25 MG L PN 100 28,5 28 23,5 26.0 x 2.0
BZS NW 10 MG S PN 400 14,5 14 21,0 10.0 x 2.0
BZS NW 13 MG S PN 250 16,5 16 22,0 12.0 x 2.0
BZS NW 16 MG S PN 250 20,9 20 26,5 16.3 x 2.4
BZS NW 20 MG S PN 250 25,9 25 27,5 20.3 x 2.4
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.