CET ST 250

Cetop square flange, welded on flanges

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction straight
Design Cetop square flange
Material S355J2G3 (ST52.3)
Mounting with metric screw set
Scope of supply with metric screw set and O-ring
Standard CETOP RP 63H
ISO 6164
Surface black oiled

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name Pressure PB bar D mm E mm M metr. C mm A mm G mm Size Ø B mm
Product Name Pressure PB bar D mm E mm M metr. C mm A mm G mm Size Ø B mm
CET 38 ST 250 250 40 30 M 6 x 25 24.7 18 1.0 3/8" 12.5
CET 12 ST 250 250 45 30 M 8 x 30 29.7 22 1.0 1/2" 15.0
CET 34 ST 250 250 50 35 M 8 x 30 35.3 28 1.0 3/4" 20.0
CET 1 ST 250 250 65 40 M 10 x 35 43.8 35 1.0 1" 25.0
CET 114 ST 250 250 75 45 M 12 x 40 51.6 43 1.0 1.1/4" 32.0
CET 112 ST 250 250 85 50 M 14 x 45 60.0 50 1.0 1.1/2" 38.0
CET 2 ST 250 250 100 60 M 16 x 55 69.4 62 1.5 2" 47.0
CET 212 ST 250 250 120 70 M 20 x 65 83.4 76 1.5 2.1/2" 58.0
CET 3 ST 250 250 140 80 M 20 x 75 102.5 90 1.5 3" 70.0
CET 312 ST 250 250 140 90 M 20 x 90 102.5 102 1.5 3.1/2" 80.0
CET 4 ST 250 250 160 105 M 24 x 100 113.2 114 1.5 4" 90.0
PN = Nominal pressure
PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.