CH3

Chevron piston ring CH3

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics
Design Chevron piston ring
Installation on multi-part pistons
Material (3) Support ring: acetal resin / PTBR, (1) Thrust ring: laminated fabric-reinforced NBR, (2) Chevron ring: fabric-reinforced NBR
Max. operating pressure up to 400 bar
Media Mineral oil, Water emulsions
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

High temperature resistance.
for difficult working conditions such as hydraulic shocks,
Strong vibrations or poor surfaces.

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
CH3-030 30 mm 20 mm 9.3 mm
CH3-032 32 mm 20 mm 10.9 mm
CH3-040 40 mm 25 mm 11.5 mm
CH3-045 45 mm 30 mm 11.5 mm
CH3-050 50 mm 35 mm 11.5 mm
CH3-055 55 mm 40 mm 11.5 mm
CH3-060 60 mm 45 mm 11.5 mm
CH3-063 63 mm 48 mm 13.0 mm
CH3-065 65 mm 50 mm 13.0 mm
CH3-070 70 mm 50 mm 15.2 mm
CH3-080 80 mm 60 mm 15.2 mm
CH3-090 90 mm 70 mm 21.2 mm
CH3-100 100 mm 80 mm 21.2 mm
CH3-110 110 mm 90 mm 21.2 mm
CH3-115 115 mm 95 mm 21.2 mm
CH3-125 125 mm 100 mm 25.8 mm
CH3-140 140 mm 115 mm 25.8 mm
CH3-150 150 mm 120 mm 29.0 mm
CH3-160 160 mm 130 mm 29.0 mm
CH3-180 180 mm 150 mm 31.5 mm
CH3-200 200 mm 170 mm 33.5 mm
CH3-225 225 mm 195 mm 33.5 mm
CH3-250 250 mm 220 mm 33.5 mm
CH3-300 300 mm 270 mm 33.5 mm

Order hints

Anderer Werkstoff möglich: FPM, Bei besonderen Betriebsbedingungen (Flüssigkeit, Temperatur, Druck ...) wenden Sie sich bitte an uns.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.