CHEM EPDM SD

Chemical supply/suction hose


Properties

Outer layer abrasion resistant, flame-retardant, ozone and weather resistant CR rubber
Special features suitable for use as pressure hose in the chemical industry
Insert two highly resistant textile inserts, two steel wire spirals, and two antistatic copper braids
Application chemical industries, Sea and industrial waste water
Colour black
Inner layer chemical resistant, black, smooth EPDM rubber
Standard DIN EN 12115
Temp. range max. depending on the medium 95°C, min. flexible to -35°C, Temperature peaks up to 120°C

Article Table

Product Name Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Vacuum bar Min. bending radius mm Roll length m
Product Name Inches Internal Ø mm External Ø mm Operating pressure bar Burst pressure bar Vacuum bar Min. bending radius mm Roll length m
CHEM 19-6 EPDM SD 3/4" 19,0 31 16,0 64 0,9 125 40
CHEM 25-6 EPDM SD 1" 25,4 37 16,0 64 0,9 150 40
CHEM 32-6 EPDM SD 1.1/4" 32,0 44 16,0 64 0,9 175 40
CHEM 38-6.5 EPDM SD 1.1/2" 38,0 51 16,0 64 0,9 225 40
CHEM 50-7 EPDM SD 2" 50,8 67 16,0 64 0,9 275 40
CHEM 63-8 EPDM SD 2.1/2" 63,5 79 16,0 64 0,9 300 40
CHEM 76-8 EPDM SD 3" 76,2 92 16,0 64 0,8 350 40
CHEM 102-8 EPDM SD 4" 101,6 118 16,0 64 0,8 450 40

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.