DAMPF AR

Steam fittings AR, with steel clamping shell

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Hot water or saturated steam applications
Connection 1 BSP nut thread
Material Steel
Pressed brass clamping shells
Max. operating pressure up to 18 bar
Scope of supply with clamping shells and seal
Sealing form 1 Flat seal
Short code DKR flat
Standard DIN EN 14423
thread standard ISO 228/DIN 2999
Surface electro galvanised
Temp. range saturated steam up to +210 °C
hot water up to +120 °C

Article Table

Product Name G1 S1 mm Clamping range (mm) Inches DN L mm Size
Product Name G1 S1 mm Clamping range (mm) Inches DN L mm Size
DAMPF 13 AR G 1/2" -14 27 24 - 26 1/2" 12 88.0 8
DAMPF 19 AR G 3/4" -14 32 32 - 34 3/4" 19 92.0 12
DAMPF 25 AR G 1" -11 41 39 - 41 1" 25 93.0 16
DAMPF 32 AR G 1.1/4" -11 50 47 - 50 1.1/4" 31 97.5 20
DAMPF 38 AR G 1.1/2" -11 55 53 - 56 1.1/2" 38 120.0 24
DAMPF 50 AR G 2" -11 70 67 - 69 2" 51 131.0 32
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.