DAMPF AR MG

Steam fittings AR, with clamping brass shell

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Hot water or saturated steam applications
Connection 1 BSP nut thread
Material Brass
Pressed brass clamping shells
Max. operating pressure up to 18 bar
Scope of supply with clamping shells and seal
Sealing form 1 Flat seal
Short code DKR flat
Standard DIN EN 14423
thread standard ISO 228/DIN 2999
Temp. range saturated steam up to +210 °C
hot water up to +120 °C

Article Table

Product Name G1 S1 mm Clamping range (mm) Inches DN L mm Size
Product Name G1 S1 mm Clamping range (mm) Inches DN L mm Size
DAMPF 13 AR MG G 1/2" -14 27 24 - 26 1/2" 12 88.0 8
DAMPF 19 AR MG G 3/4" -14 32 32 - 34 3/4" 19 92.0 12
DAMPF 25 AR MG G 1" -11 41 39 - 41 1" 25 93.0 16
DAMPF 32 AR MG G 1.1/4" -11 - 47 - 50 1.1/4" 31 97.5 20
DAMPF 38 AR MG G 1.1/2" -11 55 53 - 56 1.1/2" 38 120.0 24
DAMPF 50 AR MG G 2" -11 70 67 - 69 2" 51 131.0 32
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.