DAMPF HR MG

Steam fittings HR, with brass clamping shell

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application area Hot water or saturated steam applications
Connection 1 BSPT conical external threads
Lieferumfang with clamping shells
Material Brass, Pressed brass clamping shells
Max. operating pressure up to 18 bar
Online-Shop https://shop.hansa-flex.com/de/DAMPFHRMG
Sealing form 1 Flat seal
Short code AGR-Flat
Standard DIN EN 14423, thread standard ISO 228/DIN 2999
Temp. range saturated steam up to +210 °C, hot water up to +120 °C

Article Table

Product Name G1 S1 mm Spannbereich (mm) Zoll DN L mm Size
Product Name G1 S1 mm Spannbereich (mm) Zoll DN L mm Size
DAMPF13HRMG G 1/2" -14 22 mm 24 - 26 1/2" 12 95.0 mm 8
DAMPF19HRMG G 3/4" -14 27 mm 32 - 34 3/4" 19 95.0 mm 12
DAMPF25HRMG G 1" -11 36 mm 39 - 41 1" 25 100.0 mm 16
DAMPF32HRMG G 1.1/4" -11 46 mm 47 - 50 1.1/4" 31 105.0 mm 20
DAMPF38HRMG G 1.1/2" -11 50 mm 53 - 56 1.1/2" 38 125.0 mm 24
DAMPF50HRMG G 2" -11 60 mm 67 - 69 2" 51 140.0 mm 32
DN = Nominal diameter, nominal width

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.