DBM NEO

Piston packing set for one-piece pistons DBM-NEO

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Application Hydraulics
Installation on one-piece or multi-part pistons
Material (1) Seal: NBR
(3) Support ring: Polyester
(4) Back ring: acetal resin
Max. operating pressure up to 300 bar
Media Mineral oil
Water emulsions
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

Extremely good sealing effect at low pressure.
Easy assembly.
Simple solution.

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
DBM 157 118-NEO 40 30 16.4
DBM 236 173-NEO 60 44 18.4
DBM 314 236-NEO 80 60 22.4

Order hints

Alternative material possible

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.