DDEM P

Piston seal, DDEM-P

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics + pneumatics
Design Piston U-ring
Design Metric
Installation on one-piece pistons A, on multi-part pistons B
Material PUR 90° Shore A
Max. operating pressure up to 16 bar
Media Air
Online-Shop https://shop.hansa-flex.com/de/DDEMP
Sliding speed max. 1.0 m/s
Temp. max. 80 °C
Temp. min. -30 °C

Description

Low-friction seal.
Simple solution.

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
DDEM2014-P 20 mm 14 mm 4.5 mm
DDEM2517-P 25 mm 17 mm 5.5 mm
DDEM3224-P 32 mm 24 mm 6.0 mm
DDEM4030-P 40 mm 30 mm 7.5 mm
DDEM5040-P 50 mm 40 mm 7.5 mm
DDEM5545-P 55 mm 45 mm 7.5 mm
DDEM6050-P 60 mm 50 mm 7.5 mm
DDEM6353-P 63 mm 53 mm 7.5 mm
DDEM6555-P 65 mm 55 mm 7.5 mm
DDEM7058-P 70 mm 58 mm 9.5 mm
DDEM7563-P 75 mm 63 mm 9.5 mm
DDEM8068-P 80 mm 68 mm 9.5 mm
DDEM8573-P 85 mm 73 mm 9.5 mm
DDEM9078-P 90 mm 78 mm 9.5 mm
DDEM00088-P 100 mm 88 mm 9.5 mm
DDEM10095-P 110 mm 95 mm 11.0 mm
DDEM20105-P 120 mm 105 mm 11.0 mm
DDEM25110-P 125 mm 110 mm 11.0 mm
DDEM60145-P 160 mm 145 mm 11.0 mm
DDEM80160-P 180 mm 160 mm 15.0 mm
DDEM00180-P 200 mm 180 mm 15.0 mm

Order hints

Dichtungen mit Durchmesser 20 bis 510 mm können wir kurzfristig anfertigen.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.