DDI

Rod seal DDI

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics + pneumatics
Design Rod U-ring
Design Inches
Installation in closed grooves A, in open grooves B
Material NBR 90° Shore A
Max. operating pressure up to 120 bar
Media Mineral oil, Water-air
Online-Shop https://shop.hansa-flex.com/de/DDI
Sliding speed max. 0.5 m/s
Temp. max. 100 °C
Temp. min. -30 °C

Description

Low-friction seal.
Simple solution.

Hints

Abmessungen siehe unter Kapitel Hydraulik / Stangendichtungen

Article Table

Product Name H mm d nom. mm L mm D mm
Product Name H mm d nom. mm L mm D mm
DDI18 3.96 mm 4.76 mm 5.5 mm 11.11 mm
DDI31 3.96 mm 7.93 mm 5.5 mm 14.28 mm
DDI37 3.96 mm 9.52 mm 5.5 mm 16.50 mm
DDI50 5.10 mm 12.70 mm 7.0 mm 21.00 mm
DDI62 4.76 mm 15.87 mm 6.0 mm 22.22 mm
DDI68 4.60 mm 17.46 mm 6.0 mm 23.81 mm
DDI75 4.76 mm 19.05 mm 6.0 mm 25.40 mm
DDI81 4.76 mm 20.63 mm 6.0 mm 28.58 mm
DDI87 4.76 mm 22.22 mm 6.0 mm 31.75 mm
DDI100 6.35 mm 25.40 mm 8.0 mm 38.10 mm
DDI106 6.35 mm 26.99 mm 8.0 mm 36.51 mm
DDI125 6.35 mm 31.75 mm 8.0 mm 44.45 mm
DDI137 7.93 mm 34.93 mm 9.5 mm 50.80 mm
DDI150 9.52 mm 38.10 mm 11.0 mm 50.80 mm
DDI156 9.52 mm 39.69 mm 11.0 mm 55.96 mm
DDI162 5.50 mm 41.28 mm 7.0 mm 50.80 mm
DDI175 7.93 mm 44.45 mm 9.5 mm 57.15 mm
DDI187 9.52 mm 47.63 mm 11.0 mm 63.50 mm
DDI212 9.52 mm 53.98 mm 11.0 mm 69.85 mm
DDI237 7.93 mm 60.33 mm 9.5 mm 76.20 mm
DDI325 7.93 mm 82.55 mm 9.5 mm 95.25 mm
DDI350 9.52 mm 88.90 mm 11.0 mm 101.60 mm

Order hints

Dichtungen mit Durchmesser 20 bis 510 mm können wir kurzfristig anfertigen., Andere Abmessungen auf Anfrage

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.