DDIM

Rod seal DDIM

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics + pneumatics
Design Rod U-ring
Design Metric
Installation in closed grooves A, in open grooves B
Material NBR 90° Shore A
Max. operating pressure up to 120 bar
Media Mineral oil, Water-air
Sliding speed max. 0.5 m/s
Temp. max. 100 °C
Temp. min. -30 °C

Description

Low-friction seal.
Simple solution.

Article Table

Product Name H mm D mm d mm L mm
Product Name H mm D mm d mm L mm
DDIM612 4.0 mm 12 mm 6 mm 4.5 mm
DDIM814 4.0 mm 14 mm 8 mm 4.5 mm
DDIM816 5.5 mm 16 mm 8 mm 6.0 mm
DDIM1018 5.5 mm 18 mm 10 mm 6.0 mm
DDIM1220 5.5 mm 20 mm 12 mm 6.0 mm
DDIM1422 5.5 mm 22 mm 14 mm 6.0 mm
DDIM1624 5.5 mm 24 mm 16 mm 6.0 mm
DDIM1825 4.5 mm 25 mm 18 mm 5.0 mm
DDIM1826 5.5 mm 26 mm 18 mm 6.0 mm
DDIM2028 5.5 mm 28 mm 20 mm 6.0 mm
DDIM2230 5.5 mm 30 mm 22 mm 6.0 mm
DDIM2535 7.0 mm 35 mm 25 mm 7.5 mm
DDIM2836 5.5 mm 36 mm 28 mm 6.0 mm
DDIM2838 7.0 mm 38 mm 28 mm 7.5 mm
DDIM3242 7.0 mm 42 mm 32 mm 7.5 mm
DDIM3646 7.0 mm 46 mm 36 mm 7.5 mm
DDIM4050 7.0 mm 50 mm 40 mm 7.5 mm
DDIM4555 7.0 mm 55 mm 45 mm 7.5 mm
DDIM5060 7.0 mm 60 mm 50 mm 7.5 mm
DDIM5668 7.0 mm 68 mm 56 mm 7.5 mm
DDIM5668-1 8.5 mm 68 mm 56 mm 9.5 mm
DDIM6072 8.5 mm 72 mm 60 mm 9.5 mm
DDIM6375 8.5 mm 75 mm 63 mm 9.5 mm
DDIM6577 8.5 mm 77 mm 65 mm 9.5 mm
DDIM7082 8.5 mm 82 mm 70 mm 9.5 mm
DDIM8092 8.5 mm 92 mm 80 mm 9.5 mm
DDIM90102 8.5 mm 102 mm 90 mm 9.5 mm
DDIM100112 8.5 mm 112 mm 100 mm 9.5 mm
DDIM100115 10.0 mm 115 mm 100 mm 11.0 mm
DDIM110130 14.0 mm 130 mm 110 mm 15.0 mm
DDIM125145 14.0 mm 145 mm 125 mm 15.0 mm
DDIM140160 14.0 mm 160 mm 140 mm 15.0 mm
DDIM160180 14.0 mm 180 mm 160 mm 15.0 mm
DDIM180200 14.0 mm 200 mm 180 mm 15.0 mm

Order hints

Andere Abmessungen auf Anfrage

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.