Rod seal DDIM-P

  • Image_1 Image_1
  • Image_2 Image_2


Anwendung Hydraulics + pneumatics
Design Rod lip seal
Installation in closed grooves A, in open grooves B
Material PUR 90° Shore A
Max. operating pressure up to 16 bar
Media Air
Sliding speed max. 1.0 m/s
Temp. max. 80 °C
Temp. min. -30 °C


Low-friction seal.
Simple solution.

Article Table

Product Name H mm D mm d mm L mm
Product Name H mm D mm d mm L mm
DDIM0509-P 2.5 mm 9 mm 5 mm 3.0 mm
DDIM0612-P 4.0 mm 12 mm 6 mm 4.5 mm
DDIM0814-P 4.0 mm 14 mm 8 mm 4.5 mm
DDIM1016-P 4.5 mm 16 mm 10 mm 5.0 mm
DDIM3038-P 5.5 mm 38 mm 30 mm 6.0 mm
DDIM5060-P 7.0 mm 60 mm 50 mm 7.5 mm

Order hints

Andere Abmessungen auf Anfrage


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.