DG

Rotary fitting, ball bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction straight
Construction type Ball bearing
Design Rotary fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 24° inner cone
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L1 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series Ø d2 mm S2
Product Name L1 mm L2 mm Operating pressure External pipe Ø mm S1 AF mm G1 Series Ø d2 mm S2
DG NW 03 HS 61 47 PN 250 6 17 22 M 14 x 1.5 S 6 17
DG NW 04 HS 61 47 PN 250 8 17 22 M 16 x 1.5 S 8 19
DG NW 08 HS 72 57 PN 250 12 24 30 M 20 x 1.5 S 12 24
DG NW 13 HS 74 57 PN 250 16 27 30 M 24 x 1.5 S 16 30
DG NW 16 HS 92 71 PN 250 20 36 41 M 30 x 2 S 20 36
DG NW 20 HS 96 72 PN 250 25 41 41 M 36 x 2 S 25 46
DG NW 25 HS 109 82 PN 250 30 46 60 M 42 x 2 S 30 50
DG NW 32 HS 114 82 PN 250 38 55 60 M 52 x 2 S 38 60
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.