DG 90

Rotary fitting, angle 90°, ball bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Construction type Ball bearing
Design Rotary fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 24° inner cone
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm Operating pressure External pipe Ø mm S1 S3 l2 mm Series L4 mm l4 mm S2
Product Name L2 mm Operating pressure External pipe Ø mm S1 S3 l2 mm Series L4 mm l4 mm S2
DG 90 NW 03 HS 31 PN 250 6 22 17 16.0 S 59.0 44.5 17
DG 90 NW 04 HS 32 PN 250 8 22 17 17.0 S 59.0 44.5 19
DG 90 NW 08 HS 38 PN 250 12 30 22 21.5 S 72.0 55.5 24
DG 90 NW 13 HS 43 PN 250 16 30 22 24.5 S 73.0 54.5 30
DG 90 NW 16 HS 48 PN 250 20 41 36 26.5 S 94.5 72.5 36
DG 90 NW 20 HS 54 PN 250 25 41 36 30.0 S 95.5 71.0 46
DG 90 NW 25 HS 62 PN 250 30 60 50 35.5 S 116.0 89.0 50
DG 90 NW 32 HS 72 PN 250 38 60 50 41.0 S 117.0 86.5 60
PN = Nominal pressure PB = Max. operating pressure
Series: LL = Very light L = Light S = Heavy
Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.