DGM 90

Rotary fitting, angle 90°, ball bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Construction type Ball bearing
Design Rotary fitting (screw-in connector)
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm S2 i mm l3 mm S3 S1 G External pipe Ø mm Operating pressure Ø d mm l2 mm Series
Product Name L2 mm S2 i mm l3 mm S3 S1 G External pipe Ø mm Operating pressure Ø d mm l2 mm Series
DGM 90 NW 03 HS 14 31 17 12 39.5 17 22 M 14 x 1.5 6 PN 250 19 16.0 S
DGM 90 NW 04 HS 32 19 12 39.5 17 22 M 14 x 1.5 8 PN 250 19 17.0 S
DGM 90 NW 08 HS 38 24 12 51.0 22 30 M 18 x 1.5 12 PN 250 22 21.5 S
DGM 90 NW 13 HS 43 30 14 49.0 22 30 M 22 x 1.5 16 PN 250 27 24.5 S
DGM 90 NW 16 HS 48 36 16 67.0 36 41 M 27 x 2 20 PN 250 32 26.5 S
DGM 90 NW 20 HS 54 46 18 65.0 36 41 M 33 x 2 25 PN 250 40 30.0 S
DGM 90 NW 25 HS 62 50 20 82.5 50 60 M 42 x 2 30 PN 250 50 35.5 S
DGM 90 NW 32 HS 72 60 22 80.5 50 60 M 48 x 2 38 PN 250 55 41.0 S
Ø = External pipe diameter
PN = Nominal pressure
PB = Max. operating pressure
Series: LL = Very light L = Light S = Heavy

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.