DGM H

Rotary fitting, ball bearing



Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Construction type Ball bearing
Design Rotary fitting (screw-in connector)
Construction straight
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 G2 i mm Ø d3 mm L1 mm L2 mm S1 S2
Product Name Series Operating pressure Ø d2 mm G1 G2 i mm Ø d3 mm L1 mm L2 mm S1 S2
DGM NW 04 HL L PN 315 6 M 10 x 1 M 12 x 1.5 8 14 40,5 7,0 22 19
DGM NW 04 HL 12 L PN 315 6 M 12 x 1.5 M 12 x 1.5 12 17 40,5 7,0 22 19
DGM NW 06 HL L PN 315 8 M 12 x 1.5 M 14 x 1.5 12 17 40,5 7,0 22 19
DGM NW 06 HL 14 L PN 315 8 M 14 x 1.5 M 14 x 1.5 12 19 40,0 7,0 22 19
DGM NW 08 HL L PN 315 10 M 14 x 1.5 M 16 x 1.5 12 19 40,0 7,0 22 19
DGM NW 08 HL 16 L PN 315 10 M 16 x 1.5 M 16 x 1.5 12 22 50,0 7,0 30 24
DGM NW 10 HL 18 L PN 315 12 M 18 x 1.5 M 18 x 1.5 14 27 50,0 7,0 30 24
DGM NW 10 HL 22 L PN 315 12 M 22 x 1.5 M 18 x 1.5 14 27 *1 7,0 30 24
DGM NW 13 HL L PN 315 15 M 18 x 1.5 M 22 x 1.5 14 24 51,0 7,0 30 24
DGM NW 13 HL 22 L PN 315 15 M 22 x 1.5 M 22 x 1.5 14 27 51,0 7,0 30 24
DGM NW 16 HL L PN 315 18 M 22 x 1.5 M 26 x 1.5 14 27 50,5 7,5 30 30
DGM NW 20 HL L PN 160 22 M 26 x 1.5 M 30 x 2 16 32 64,5 7,5 41 36
DGM NW 03 HS 12 H S PN 500 6 M 12 x 1.5 M 14 x 1.5 12 17 42,5 7,0 22 19
DGM NW 06 HS 18 H S PN 500 10 M 18 x 1.5 M 18 x 1.5 12 22 42,0 7,5 22 19
DGM NW 06 HS H S PN 500 10 M 16 x 1.5 M 18 x 1.5 12 22 42,0 7,5 22 19
DGM NW 20 HS 27 H S PN 400 25 M 27 x 2 M 36 x 2 18 40 66,0 12,0 41 36
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.