DGR

Rotary fitting, ball bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction straight
Construction type Ball bearing
Design Rotary fitting (screw-in connector)
Material Steel
Scope of supply Socket with union nut and cutting ring
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm S2 i mm L1 mm S3 G2 S1 Ø d3 mm External pipe Ø mm Operating pressure G1 Series Ø d2 mm
Product Name L2 mm S2 i mm L1 mm S3 G2 S1 Ø d3 mm External pipe Ø mm Operating pressure G1 Series Ø d2 mm
DGR NW 03 HS 42.0 17 12 49 17 M 14 x 1.5 22 19 6 PN 250 G 1/4" -19 S 6
DGR NW 04 HS 42.0 17 12 49 19 M 16 x 1.5 22 19 8 PN 250 G 1/4" -19 S 8
DGR NW 08 HS 52.5 24 12 60 24 M 20 x 1.5 30 22 12 PN 250 G 3/8" -19 S 12
DGR NW 13 HS 54.5 27 14 60 30 M 24 x 1.5 30 27 16 PN 250 G 1/2" -14 S 16
DGR NW 16 HS 65.5 36 16 76 36 M 30 x 2 41 32 20 PN 250 G 3/4" -14 S 20
DGR NW 20 HS 66.0 41 18 78 46 M 36 x 2 41 40 25 PN 250 G 1" -11 S 25
DGR NW 25 HS 75.5 46 20 89 50 M 42 x 2 60 50 30 PN 250 G 1.1/4" -11 S 30
DGR NW 32 HS 76.0 55 22 92 60 M 52 x 2 60 55 38 PN 250 G 1.1/2" -11 S 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.