DGR 90

Rotary fitting, angle 90°, ball bearing

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Construction type Ball bearing
Design Rotary fitting (screw-in connector)
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape E
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm L2 mm l3 mm Operating pressure G External pipe Ø mm S1 S3 Ø d mm l2 mm Series S2
Product Name i mm L2 mm l3 mm Operating pressure G External pipe Ø mm S1 S3 Ø d mm l2 mm Series S2
DGR 90 NW 03 HS 12 31 39.5 PN 250 G 1/4" -19 6 22 17 19 16.0 S 17
DGR 90 NW 04 HS 12 32 39.5 PN 250 G 1/4" -19 8 22 17 19 17.0 S 19
DGR 90 NW 08 HS 12 38 51.0 PN 250 G 3/8" -19 12 30 22 22 21.5 S 24
DGR 90 NW 13 HS 14 43 49.0 PN 250 G 1/2" -14 16 30 22 27 24.5 S 30
DGR 90 NW 16 HS 16 48 67.0 PN 250 G 3/4" -14 20 41 36 32 26.5 S 36
DGR 90 NW 20 HS 18 54 65.0 PN 250 G 1" -11 25 41 36 40 30.0 S 46
DGR 90 NW 25 HS 20 62 82.5 PN 250 G 1.1/4" -11 30 60 50 50 35.5 S 50
DGR 90 NW 32 HS 22 72 80.5 PN 250 G 1.1/2" -11 38 60 50 55 41.0 S 60
Ø = External pipe diameter
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.