DPC NEO

Piston packing set for split pistons DPC-NEO

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics
Installation on multi-part pistons
Material (3) Back ring: acetal resin, (1) Seal: fabric-reinforced NBR
Max. operating pressure up to 700 bar
Media Mineral oil, Water emulsions
Sliding speed max. 0.5 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

Extremely good sealing effect at low pressure.
Low friction.
High pressure.
Simple solution.

Article Table

Product Name D mm P mm d mm L mm
Product Name D mm P mm d mm L mm
DPC8565-NEO 85 mm 83.3 mm 65 mm 22.4 mm
DPC9070-NEO 90 mm 88.3 mm 70 mm 22.4 mm
DPC10080-NEO 100 mm 98.3 mm 80 mm 25.4 mm
DPC120100-NEO 120 mm 118.3 mm 100 mm 25.4 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.