DS

Piston seal DS



Properties

Application Hydraulics
Design U-ring packing set
Media Mineral oils, Water emulsions
Material (1) Support ring: NBR, (2) Seal: fabric-reinforced NBR
Installation on multi-part pistons
Operating pressure up to 250 bar

Description

Low spatial requirement.
High resistance to extrusion.

Hints

Tolerance: D= H9/e8; d= +/-0.06; M= +/-0.1 L= +0.12/0

Article Table

Product Name D mm d mm L mm
Product Name D mm d mm L mm
DS 940 47 24 12 7,5
DS 980 51 25 13 8,0
DS 157 098 40 25 10,0
DS 196 137 50 35 10,0
DS 216 1571 55 40 9,5
DS 216 157 55 40 12,0
DS 255 177 65 45 13,5
DS 275 196 70 50 13,5
DS 314 236 80 60 13,5
DS 354 275 90 70 13,5
DS 374 295 95 75 13,5
DS 590 492 150 125 14,0
DS 787 669 200 170 19,8
DS 886 767 225 195 19,8
DS 984 866 250 220 19,8
DS 118 11062 300 270 19,8

Order hints

For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.