DSFS (3000 PSI)

SAE stub end flange connector



Properties

Design SAE stub end flange connector
Construction straight
Mounting with metric screw set
Scope of supply with 2 flange halves, screw set and O-ring
Standard ISO 6162, SAE J 518 C
Surface electro galvanised
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name PB 10.9 bar Size Pipe A mm Ø B mm C mm D mm E mm F mm G mm L mm M metr. M unc
Product Name PB 10.9 bar Size Pipe A mm Ø B mm C mm D mm E mm F mm G mm L mm M metr. M unc
DSFS 3001-16 350 1/2" 16 x 2 16,0 12,0 38,1 54 17,5 45,6 82 8,5 M 8 x 30 5/16" x 1.1/4"
DSFS 3001-21.3 350 1/2" 21.3 x 4.7 22,0 15,5 38,1 54 17,5 45,6 82 8,5 M 8 x 30 5/16" x 1.1/4"
DSFS 3002-25 350 3/4" 25 x 3 27,0 18,9 47,6 65 22,2 51,8 100 10,5 M 10 x 30 3/8" x 1.1/4"
DSFS 3002-26.9 350 3/4" 26.9 x 3.9 27,0 18,9 47,6 65 22,2 51,8 100 10,5 M 10 x 30 3/8" x 1.1/4"
DSFS 3003-28 315 1" 28 x 3 28,0 22,0 52,4 70 26,2 58,4 100 10,5 M 10 x 35 3/8" x 1.1/4"
DSFS 3003-30 315 1" 30 x 4 30,0 22,0 52,4 70 26,2 58,4 100 10,5 M 10 x 35 3/8" x 1.1/4"
DSFS 3003-33.7 315 1" 33.7 x 4.5 34,0 24,7 52,4 70 26,2 58,4 100 10,5 M 10 x 35 3/8" x 1.1/4"
DSFS 3003-38 315 1" 38 x 5 38,0 28,0 52,4 70 26,2 58,4 100 10,5 M 10 x 35 3/8" x 1.1/4"
DSFS 3004-38 250 1.1/4" 38 x 5 38,0 28,0 58,7 79 30,2 72,6 110 11,0 *1 7/16" x 1.1/2"
DSFS 3004-42.4 250 1.1/4" 42.4 x 6.3 43,0 29,7 58,7 79 30,2 72,6 110 11,0 *1 7/16" x 1.1/2"
DSFS 3005-38 200 1.1/2" 38 x 4 38,0 30,0 69,9 94 35,7 82,2 114 13,5 M 12 x 35 1/2" x 1.1/2"
DSFS 3005-42 200 1.1/2" 42 x 5 42,0 32,0 69,9 94 35,7 82,2 114 13,5 M 12 x 35 1/2" x 1.1/2"
DSFS 3005-45 200 1.1/2" 45 x 5 45,0 35,0 69,9 94 35,7 82,2 114 13,5 M 12 x 35 1/2" x 1.1/2"
DSFS 3005-48.3 200 1.1/2" 48.3 x 7.1 49,0 34,0 69,9 94 35,7 82,2 114 13,5 M 12 x 35 1/2" x 1.1/2"
DSFS 3006-55 200 2" 55 x 5 55,0 45,0 77,8 102 42,9 96,4 114 13,5 M 12 x 35 1/2" x 1.1/2"
DSFS 3006-60.3 200 2" 60.3 x 8 60,3 44,0 77,8 102 42,9 96,4 114 13,5 M 12 x 35 1/2" x 1.1/2"
DSFS 3007-65 160 2" 65 x 6 65,0 53,0 88,9 114 50,8 108,2 116 13,5 M 12 x 40 1/2" x 1.3/4"
DSFS 3007-70 160 2.1/2" 70 x 7.5 70,0 55,0 88,9 114 50,8 108,2 116 13,5 M 12 x 40 1/2" x 1.3/4"
DSFS 3007-76.1 160 2.1/2" 76.1 x 7.1 74,0 62,0 88,9 114 50,8 108,2 116 13,5 M 12 x 40 1/2" x 1.3/4"
DSFS 3008-80 138 2.1/2" 80 x 6 80,0 68,0 106,4 135 61,9 130,6 120 16,7 M 16 x 45 5/8" x 2"
DSFS 3008-88.9 138 3" 88.9 x 8 90,0 73,0 106,4 135 61,9 130,6 120 16,7 M 16 x 45 5/8" x 2"
DSFS 3009-100 35 3.1/2" 100 x 6 100,0 88,0 120,7 152 69,9 139,0 120 17,0 M 16 x 45 5/8" x 2"
DSFS 3009-88.9 35 3" 88.9 x 8 90,0 73,0 120,7 152 69,9 139,0 120 17,0 M 16 x 45 5/8" x 2"
DSFS 3010-110 35 3.1/2" 110 x 6 110,0 98,0 130,2 162 77,8 152,0 120 17,0 M 16 x 50 5/8" x 2"
DSFS 3010-114.3 35 4" 114.3 x 8.8 115,0 96,7 130,2 162 77,8 152,0 120 17,0 M 16 x 50 5/8" x 2"
DSFS 3011-133 35 5" 133 x 6.5 133,0 120,0 152,4 184 92,1 180,0 120 17,0 M 16 x 50 5/8" x 2"
DSFS 3011-139.7 35 5" 139.7 x 10 140,0 120,0 152,4 184 92,1 180,0 120 17,0 M 16 x 50 5/8" x 2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.