DSM

Piston packing set for split pistons DSM



Properties

Application Hydraulics
Design piston seal
Media Mineral oils, Water emulsions
Material (1) Seal: NBR, (2) Guide ring: acetal resin, (3) Support ring: fabric-reinforced NBR
Installation on multi-part pistons
Operating pressure up to 700 bar

Description

Extremely good sealing effect at low pressure.
for difficult working conditions such as hydraulic shocks,
Strong vibrations or poor surfaces.

Article Table

Product Name D mm d mm L mm G mm M mm P mm
Product Name D mm d mm L mm G mm M mm P mm
DSM 216 157-1A 55,00 40,00 32,00 6,35 48,77 52,85
DSM 236 173-1A 60,00 44,00 32,00 6,35 53,80 57,80
DSM 255 192-1A 65,00 49,00 32,00 6,35 58,70 62,80
DSM 275 196-1A 70,00 50,00 35,00 9,52 62,62 67,54
DSM 295 216-1A 75,00 55,00 35,00 9,52 67,70 72,54
DSM 314 236-1A 80,00 60,00 35,00 9,52 72,62 77,52
DSM 314 251-1A 80,00 64,00 32,00 9,52 72,62 77,52
DSM 334 255-1A 85,00 65,00 35,00 9,52 77,62 82,54
DSM 354 275-1A 90,00 70,00 35,00 9,52 82,58 87,79
DSM 374 295-1A 95,00 75,00 35,00 9,52 87,60 92,50
DSM 393 314-1A 100,00 80,00 35,00 9,52 92,60 97,50
DSM 413 334-1A 105,00 85,00 35,00 9,52 97,60 102,50
DSM 433 354-1A 110,00 90,00 35,00 9,52 102,70 107,51
DSM 472 393-1A 120,00 100,00 35,00 9,52 112,80 117,51
DSM 492 393-1A 125,00 100,00 45,00 12,70 116,82 122,33
DSM 500 400-1A 127,00 101,60 44,45 12,70 118,80 124,36
DSM 511 413-1A 130,00 105,00 45,00 12,70 121,82 127,33
DSM 551 452-1A 140,00 115,00 45,00 12,70 131,72 137,30
DSM 551 472-1A 140,00 120,00 35,00 9,52 132,70 137,30
DSM 590 492-1A 150,00 125,00 45,00 12,70 141,72 147,30
DSM 629 531-1A 160,00 135,00 45,00 12,70 151,72 157,10
DSM 669 551-1A 170,00 140,00 45,00 12,70 163,00 167,87
DSM 708 610-1A 180,00 155,00 45,00 12,70 171,60 177,10
DSM 787 688-1A 200,00 175,00 45,00 12,70 191,72 197,10
DSM 826 728-1A 210,00 185,00 45,00 12,70 201,60 207,10
DSM 866 767-1A 220,00 195,00 45,00 12,70 211,60 217,10
DSM 102 4925-1A 260,00 235,00 45,00 12,70 251,72 257,10
DSM 110 21004-1A 280,00 255,00 45,00 12,70 271,72 277,10

Order hints

For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.