DSR

Wiper DSR



Properties

Application Hydraulics
Design Wipers
Media Mineral oils, Water emulsions
Material NBR
Installation bend the wiper into a kidney shape and press into the locating groove

Description

Easy assembly.

Hints

Tolerance: d= h11; D= H11; C= H11; L= +0.2 / 0

Article Table

Product Name d mm D mm L mm C mm E mm
Product Name d mm D mm L mm C mm E mm
DSR 4 4 12 4,0 10 1,0
DSR 8 8 16 4,0 14 1,0
DSR 10 10 18 4,0 16 1,0
DSR 12 12 20 4,0 18 1,0
DSR 14 14 22 4,0 20 1,0
DSR 15 15 23 4,0 21 1,0
DSR 16 16 24 4,0 22 1,0
DSR 18 18 26 4,0 24 1,0
DSR 20 20 28 4,0 26 1,0
DSR 22 22 30 4,0 28 1,0
DSR 24 24 32 4,0 30 1,0
DSR 25 25 33 4,0 31 1,0
DSR 28 28 36 4,0 34 1,0
DSR 30 30 38 4,0 36 1,0
DSR 32 32 40 4,0 38 1,0
DSR 35 35 43 4,0 41 1,0
DSR 36 36 44 4,0 42 1,0
DSR 38 38 46 4,0 44 1,0
DSR 40 40 48 4,0 46 1,0
DSR 42 42 50 4,0 48 1,0
DSR 45 45 53 4,0 51 1,0
DSR 48 48 56 4,0 54 1,0
DSR 50 50 58 4,0 56 1,0
DSR 52 52 60 4,0 58 1,0
DSR 55 55 63 4,0 61 1,0
DSR 56 56 64 4,0 62 1,0
DSR 60 60 68 4,0 66 1,0
DSR 62 62 70 4,0 68 1,0
DSR 63 63 71 4,0 69 1,0
DSR 65 65 73 4,0 71 1,0
DSR 70 70 78 4,0 76 1,0
DSR 75 75 83 4,0 81 1,0
DSR 80 80 88 4,0 86 1,0
DSR 85 85 93 4,0 91 1,0
DSR 90 90 98 4,0 96 1,0
DSR 95 95 103 4,0 101 1,0
DSR 100 100 108 4,0 106 1,0
DSR 105 105 117 5,5 114 1,5
DSR 110 110 122 5,5 119 1,5
DSR 120 120 132 5,5 129 1,5
DSR 125 125 137 5,5 134 1,5
DSR 130 130 142 5,5 139 1,5
DSR 140 140 152 5,5 149 1,5
DSR 150 150 162 5,5 159 1,5
DSR 160 160 172 5,5 169 1,5
DSR 170 170 182 5,5 179 1,5
DSR 180 180 192 5,5 189 1,5
DSR 190 190 202 5,5 199 1,5
DSR 200 200 212 5,5 209 1,5
DSR 220 220 235 6,5 231 2,0
DSR 250 250 265 6,5 261 2,0

Order hints

Alternative material possible: FPM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.